| PRODUCT > SET (HIGHTVOLT EQUIPMENT) > OVER HEADLINE HARDWARE > BOLT MACHINE ................................................................................................................................................................................. |
|
| BOLT MACHINE |
|
|
*ได้รับการจดทะเบียนกับการไฟฟ้าส่วนภูมิภาค |
|
|
| MAT NO. PEA |
MACHINE BOLT SIZE |
Dimension in mm (Tolerance in mm) |
|||||
| d | l | b | k | e | m | ||
| 1-01-011-0200 | M.16X130 |
16+0.95-0.75 |
130+50 |
35+60 | 10.5+2.0-0.9 | 26 or 240-0.8 | 13 (+-0.9) |
| 1-01-011-0201 | M.16X170 | 16+0.95-0.75 | 170+3-2 | 50+60 | 10.5+2.0-0.9 | 26 or 240-0.8 | 13 (+-0.9) |
| 1-01-011-0202 | M.16X200 | 16+0.95-0.75 | 200+3-2.3 | 50+60 | 10.5+2.0-0.9 | 26 or 240-0.8 | 13 (+-0.9) |
| 1-01-011-0203 | M.16X250 | 16+0.95-0.75 | 250+5-2.3 | 75+80 | 10.5+2.0-0.9 | 26 or 240-0.8 | 13 (+-0.9) |
| 1-01-011-0204 | M.16X300 | 16+0.95-0.75 | 300+5-2.6 | 75+80 | 10.5+2.0-0.9 | 26 or 240-0.8 | 13 (+-0.9) |
| 1-01-011-0205 | M.16X350 | 16+0.95-0.75 | 350+5-2.85 | 75+80 | 10.5+2.0-0.9 | 26 or 240-0.8 | 13 (+-0.9) |
| 1-01-011-0206 | M.16X400 | 16+0.95-0.75 | 400+5-2.85 | 100+80 | 10.5+2.0-0.9 | 26 or 240-0.8 | 13 (+-0.9) |
| 1-01-011-0207 | M.16X450 | 16+0.95-0.75 | 450+7-3.15 | 100+80 | 10.5+2.0-0.9 | 26 or 240-0.8 | 13 (+-0.9) |
| 1-01-011-0208 | M.16X500 | 16+0.95-0.75 | 500+7-3.15 | 150+80 | 10.5+2.0-0.9 | 26 or 240-0.8 | 13 (+-0.9) |
| Minimum | |
| AVERAGE OF ZINC COATING THICKNESS | 53 microns |
| BREAKING STRENGTH | 5,000 kilograms-force |
Note : Thread length (b) is mesured from the end of the bolt to the last thread of nut entering.
Remark - According to PEA Specification
